Note when using the Teradek Cube to send camera signals to VidBlasterX (using its RTSP/RTMP In module) that the Cube is limited to sending approximately 5 Mbps over WLAN and close to 10 Mbps over wired networks. Normally this should suffice, but keep in mind if you use the same Cube for multiple copies of VidBlasterX. E.g. if you leave the Cube to its default 3 Mbps setting and use it in two copies of VidBlasterX, its signal will break if you are using WLAN. Obviously you also need to account for the maximum allowed bandwidth of the network.